janis/aes67-daemon
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity

Update DEVICES.md

Browse Source 
minor changes
This commit is contained in:
Andrea Bondavalli 2020-06-27 10:11:56 +02:00 committed by GitHub
parent 9b6dfa887f
commit 81849fc46c
No known key found for this signature in database
GPG Key ID: 4AEE18F83AFDEB23
1 changed files with 4 additions and 3 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

7
DEVICES.md
View File

@ -1,6 +1,7 @@
# Devices and interoperability tests #
This document describes the interoperability tests carried out using the AES67 daemon and provides a guide to execute them.
Before starting make sure that the [AES67 daemon basic setup](#daemon_setup) is done.
The following devices have been tested:
@ -10,7 +11,7 @@ The following devices have been tested:
* [Hasseb audio over Ethernet receiver](#hasseb_receiver)
## AES67 daemon basic setup##
## AES67 daemon basic setup ##
<a name="daemon_setup"></a>
Before running any interoperability test configure the AES67 daemon with the following instructions:
@ -53,7 +54,7 @@ To run interoperability tests using the [Dante Controller](https://www.audinate.
## Audinate Dante Controller and Dante transmitter ##
<a name="dante_avio_transmitter"></a>
To run interoperability tests using the [Dante Controller](https://www.audinate.com/products/software/dante-controller) and a Dante transmitter use the followings steps. These were tested using a Dante AVIOUBS and AVIOAI2 devices.
To run interoperability tests using the [Dante Controller](https://www.audinate.com/products/software/dante-controller) and a Dante transmitter use the followings steps. These were tested using Dante AVIOUBS and AVIOAI2 devices.
* make sure [AES67 daemon basic setup](#daemon_setup) is done
* download and install the Dante controller
@ -74,7 +75,7 @@ To run interoperability tests using the [Hasseb audio over Ethernet receiver](ht
* make sure [AES67 daemon basic setup](#daemon_setup) is done
* open the Hasseb WebUI and do the following:
* deselect the "PTP slave only" checkbox to enable PTP master on Hasseb device
* wait for the daemon source to show up in the "Stream name" drop down list and select it. Please note that mDNS support must be enabled on the daemon
* wait for the daemon source to show up in the "Stream name" drop down list and select it. In this case mDNS support must be enabled on the daemon
* press the Submit button
* go to the daemon WebUI, click on the PTP tab and wait for the "PTP Status" to report "locked"
* open a shell on the Linux host and start the playback on the RAVENNA ALSA device. For example to playback a test sound use: